View FEP30DP_266540.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FEP30AP THRU FEP30JP
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts
TO-247AD
0.645 (16.4) 0.625 (15.9) 0.203 (5.16) 0.193 (4.90) 0.245 (6.2) 0.225 (5.7) 0.323 (8.2) 0.313 (7.9) 10o 30o 0.078 REF (1.98)
Forward Current - 30.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Dual rectifier construction, positive center-tap Glass passivated chip junctions Superfast recovery times for high efficiency Low forward voltage, high current capability Low thermal resistance Low power loss High temperature soldering guaranteed: 250C, 0.16" (4.06mm) from case for 10 seconds
0.170 (4.3) 0.840 (21.3) 0.820 (20.8)
10o TYP. BOTH SIDES
0.142 (3.6) 0.138 (3.5)
1
2
3
0.086 (2.18) 0.076 (1.93)
1o REF. BOTH SIDES 0.118 (3.0) 0.108 (2.7)
0.127 (3.22) 0.160 (4.1) 0.140 (3.5) 0.795 (20.2) 0.775 (19.6) 0.117 (2.97)
MECHANICAL DATA
0.048 (1.22) 0.225 (5.7) 0.205 (5.2) 0.044 (1.12) 0.030 (0.76) 0.020 (0.51) PIN 2 CASE
PIN 1 PIN 3
Dimensions in inches and (millimeters)
Case: JEDEC TO-247AD molded plastic body over passivated chips Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in. - lbs. max. Weight: 0.22 ounce, 6.3 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
SYMBOLS
FEP 30AP
FEP 30BP
FEP 30CP
FEP 30DP
FEP 30FP
FEP 30GP
FEP 30HP
FEP 30JP
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TC=100C Maximum instantaneous forward voltage per leg at 15.0A Maximum DC reverse current at rated DC blocking voltage TC=25C TC=100C
VRRM VRMS VDC I(AV)
50 35 50
100 70 100
150 105 150
200 140 200
300 210 300 30.0
400 280 400
500 350 500
600 420 600
Volts Volts Volts Amps
IFSM
300.0
Amps
VF IR trr CJ RJC TJ, TSTG
0.95 10.0 500.0 35.0 175.0 1.0
1.3
1.5
Volts A
Maximum reverse recovery time time (NOTE 1) per leg Typical junction capacitance per leg (NOTE 2) Typical thermal resistance (NOTE 3) Operating storage and temperature range
50.0 145.0
ns pF C/W C
-55 to +150
NOTES: 1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to case per leg mounted on heatsink
4/98
RATINGS AND CHARACTERISTIC CURVES FEP30AP THRU FEP30JP
FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG
36 30 24 12 6.0 0
300
PEAK FORWARD SURGE CURRENT, AMPERES
RESISTIVE OR INDUCTIVE LOAD
250 200 150 100 50 0
TC=100C 8.3ms SINGLE HALF SINE WAVE (JEDEC Method)
0
50
100
150
CASE TEMPERATURE, C
1
10
NUMBER OF CYCLES AT 60 HZ
100
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG
40
INSTANTANEOUS FORWARD CURRENT, AMPERES
PULSE WIDTH=300s 1% DUTY CYCLE TJ=125C
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG
1,000
10
INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES
100
TJ=25C
1
50-200V 300-400V 500-600V
25 TJ=
C
10
100 C
0.1 0.2
TJ=
0.4
0.6
0.8
1.0
1.2
1.4
1.6
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
1
50-200V 300-600V
25 TJ=
C
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
1,000
JUNCTION CAPACITANCE, pF
0.1 0
20
40
60
80
100
TJ=25C f=1.0 MHZ Vsig=50mVp-p
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
100
50-400V 500-600V
10 0.1
1
10
100
REVERSE VOLTAGE, VOLTS

▲Up To Search▲

Price & Availability of FEP30DP

	To Download FEP30DP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .